The Waterflosser Pro standard nozzle is ergonomically designed to reach and clean hard-to-reach areas, helping you effectively clean your teeth and gums and keep your mouth fresh and clean.

• 1 x Waterflosser Pro Standard Nozzle (2 pcs)

How to use your Waterflosser Pro?

1. Insert the Waterflosser Pro nozzle you need to use into the center of the knob on the handle of the oral irrigator until it snaps properly.

2. Lift the flap of the tank and fill it with water, noting that you can only fill the tank with the Waterflosser Pro powered off.

3. Press the power button to turn on the Waterflosser Pro.
Press the mode selection button repeatedly to select the desired mode – switch between Gentle, Standard, Deep, Pulse, and Custom modes when pressed repeatedly.

4. While using the Waterflosser Pro, it can be paused by pressing the mode selection button.

5. Adjust the direction of water flow by rotating the nozzle on the Waterflosser Pro.

6. Hold the Waterflosser Pro upright to ensure that the water is ejected smoothly from the storage tank.

7. After 120 seconds of running in any mode, the Waterflosser Pro will automatically power off.

8. When charging the Waterflosser Pro, the LED indicator will show the current battery level. You can also check the battery level by pressing the mode selection button when the Waterflosser Pro is powered off.

9. When you turn on Waterflosser Pro, it will default to the last mode you selected before the last shutdown.

Pro Tips:
For the best cleaning results, start with the back teeth and gradually move to the front teeth. Slide the tip of the nozzle along the gum line and stay between the teeth for a short time. Continue to do this until you have thoroughly cleaned the inside and outside of your upper and lower teeth.